Rubber Smoke House
A Rubland rubber smoke house consists of a chamber into which the sheets are loaded on removable reapers placed on a wooden framework. Smoke is generated in the Rublands special furnace, which is usually outside the chamber. Smoke and hot air from the furnace are directed into the chamber through a flue. Air inlets and ventilators are provided at the bottom and top of the chamber respectively. Rublands special smoke flue avoids direct contact of fire inside the smoking chamber . Temperature can also be regulated by adjusting the rate of burning of the firewood by opening or closing the air inlets in the furnace door
The chamber is of brickwork with a reinforced concrete frame. The smoke house is provided with adequate drainage to facilitate removal of serum dripping from the sheets. The roof and the ceiling may be of asbestos sheets and the gap between the roof and the ceiling at the top of the walls shall be closed from all the four sides of the smoke house, so as to avoid heat loss due to air currents over the ceiling and to prevent condensed moisture containing carbon from dripping on sheets.Rubland rubber smoke houses are of four types, those in which the number of rubber sheets that can accommodate are 180, 300,380,1650 respectively
Generaly,the sheets are turned on the reapers every day for uniform smoking and drying and to avoid reaper marks on dry sheets. Three days of smoking is generally sufficient under normal conditions, but during the rainy season four to five days are required for satisfactory drying of sheets
Our Rubland rubber smoke house are cheaper compare to other smoke house available in market but stronger and need less time to make Ribbed Smoked Sheets of grade 4.We had successfully built more than 300 rubber smoke houses inside Kerala from Thiruvananthapuram to Kasarkodu. Rubland is the name of trust in rubber smoke house building in rubber planters in kerala.
|Capacity of Rubber Sheets||Price|
Rub Land Fire Tech Incinetor
Incineration is a waste treatment process that involves the combustion of organic substances contained in waste materials. Incineration and other high temperature waste treatment systems are described as "thermal treatment". Incineration of waste materials converts the waste into ash, flue gas, and heat. The ash is mostly formed by the inorganicconstituents of the waste, and may take the form of solid lumps or particulates carried by the flue gas. The flue gases must be cleaned of gaseous and particulate pollutants before they are dispersed into the atmosphere.
Rublands incinerator is constructed of heavy, well-insulated materials, so that it does not give off extreme amounts of external heat. The high levels of heat are kept inside the furnace or unit so that the waste is burned quickly and efficiently. If the heat were allowed to escape, the waste would not burn as completely or as rapidly.